MONACO
A spectacular design inspired by Belle Epoque era
SMART BENEFITS
Inspired by the Belle Époque, Monaco Roof Tile features a symmetrical profile for versatile installation. Monaco Roof Tile's deep profiling and a high step ensure strength, while efficient design reduces material use on complex roofs. Monaco Roof Tiles is available in modular, bi-modular, or long panel versions, they bring elegance without compromise.
Successfully blends into most architectural styles 
Environmentally friendly 
Minimum maintenance (no regular interventions: painting, varnishing, treatments against insects, sun or humidity) 
Complete range of accessories 
Extended lifetime of over 40 years 
Good mechanical resistance in harsh weather conditions FINISHES & COLORS
Matt
A matt polyester-coated metal sheet features a durable finish with higher corrosion protection and a refined, low-gloss appearance, ideal for roofing and cladding.
Glossy
A polyester-coated metal sheet offers corrosion resistance and a durable, weatherproof finish for long-lasting protection.
Displayed product colors could vary from one screen to another, according to the display's settings or filters used. For best accuracy please make sure that you ask a sales representative for a color plate sampler.
TECHNICAL SPECIFICATIONS
- Total width 1181 mm
- Useful width 1060 mm
- Profile depth 34 mm
- Tile step height 35 mm
- Total profile height 69 mm
- Battening distance 350 mm
- Minimum installation slope 14°
- Weight 4 Kg / m²
- Thickness 0.50 mm
- Length 375 - 6000 mm
SMART ACCESSORIES
ROUND FINNED CREST
ROUND FINNED CREST
Used to close the intersection between 2 roof slopes, straight or angle-mounted.
STRAIGHT RIDGE
STRAIGHT RIDGE
Used to close the intersection between 2 roof slopes, straight or angle-mounted.
WALL EAVES METAL ROOF TILE
WALL EAVES METAL ROOF TILE
It is mounted at the intersection between a wall or blind wall and a roof slope, at a straight angle. The pitch angle runs along the blind wall. It is fastened onto the wall.
VALLEY
VALLEY
Mounted at the intersection of two roofing slopes. A limit of 70mm is drawn lengthwise the valley axis, on both sides, which will dictate the tile board covering.
GUTTER GRADE
GUTTER GRADE
It is mounted on the collection system wooden underlayer, subsequent to the latter, but prior to the anti-condensation sheets. Upon the installation, it overlaps onto the downspout over 5 cm.
BORDER BAR GRADE
BORDER BAR GRADE
It is installed at the edge of the roof, after installing the gutter grade and before installing the roof tile panels. Its role is to gather water infiltrations that may occur due to lack of perpendicularity between the edge of the roof and the gutter edge.
RIDGE ANGLE
RIDGE ANGLE
It is used to close the upper ridge area, in case a roof slope intersects one of the vertical building walls.
EDGE ANGLE BRACKET
EDGE ANGLE BRACKET
Used together with the corner edge eaves flashing / water deviation eaves flashing
at the side closure of the roof.
BLIND WALL ANGLE
BLIND WALL ANGLE
It is used at the intersection between a wall / blind wall and a roof slope, at a blunt angle. The slope angle starts at the intersection with the wall. The blind wall angle is mounted in the wall.
FASCIA COVERING PROFILE
FASCIA COVERING PROFILE
Used to cover and isolate side fascia areas left exposed after the mounting of the roofing.
TRANSITION FLASHING – OUTSIDE
TRANSITION FLASHING – OUTSIDE
It is used at the transition from a smoother to a steeper slope, on the same roof ridge.
TRANSITION FLASHING – INSIDE
TRANSITION FLASHING – INSIDE
It is used at the transition from a steeper to a smoother slope, on the same roof ridge.
CREST CAP
CREST CAP
Used to close the ROUND FINNED CREST. Pre-bored for efficient ventilation.
SNOW GUARD
SNOW GUARD
It is used for low slope roofing. Mounted in triangle, to gradually break the snow mass sliding off the roof.
SNOW STOPPER
SNOW STOPPER
Designed for steep slope roofing, to prevent snow from falling off the surface of the roof. It is installed alternatively, with overlaps, in order to correctly cover the entire slope, positioned so that the building structure is able to withstand the weight of the accumulated snow.
SMART INSTALLATION PRINCIPLES
Roof length shall be calculated between the eaves line and the ridge line, the metal tile panels being calculated as multiple of the length of a module (35 cm).
Shall be mounted on the batten for the rainwater collection system, after installing the latter, but before installing the anti-condensation foil. For installation, a 5 cm overlay with the gutter shall be used.
Shall be fastened with clamps, without drilling any holes. The valley flashing shall be installed at the intersection between 2 slopes of the roof.
The border bar grade is used to collect rainwater from the sides of the roof.
The panels are placed from right to left, from the bottom. Before starting installation, we need to determine the angle between the eaves and the gable. Depending on the result obtained, the panels will be cut for perpendicular positioning on the eaves.
The border bar shall be installed over the metal tiles and the plank bordering the roof (fascia) and shall be set with self-drilling screws every 70 to 70 cm.
The ridges shall be set with self-drilling screws in the tangential spots of the metal tiles.
Shall be used for closing ribbed ridge tiles. It has holes to ensure proper ventilation of the entire roofing system.
Shall be installed in roofs with higher pitches, 70 cm from the lower edge of the roof.
They shall be installed in a triangle shape, in order to cut the mass of snow sliding from the roof, step by step.
SMART VIDEO INSTALLATION GUIDE
